Radware Alteon Application Manual page 321

>> Real Server 2 IDS# idsport 25
>> Real Server 2 IDS# oid 1.3.6.1.2.1.2.2.1.8.258
>> # /cfg/slb/real 3/rip 11.11.11.100/ena
>> Real server 3 # ids/idsvlan 1003
>> Real Server 3 IDS# idsport 25
>> Real Server 3 IDS# oid
1.3.6.1.2.1.2.2.1.8.259
>> # /cfg/slb/real 4/rip 11.11.11.100/ena
>> Real server 4 # ids/idsvlan 1004
>> Real Server 4 IDS# idsport 25
>> Real Server 4 IDS# oid
1.3.6.1.2.1.2.2.1.8.260
7. Create an IDS group and add the IDS servers. Define the IDS group. The IDS group numbers
must be between 1 to 63.
>> # /cfg/slb/group 53
>>Real Server Group 53# add 1
>>Real Server Group 53# add 2
>>Real Server Group 53# add 3
>>Real Server Group 53# add 4
8. Define the group metric for the IDS server group. IDS SLB supports the hash metric only.
>>Real Server Group 53# metric hash
9. Define the health check for the group.
>>Real Server Group 50# health snmp1
10. Define the group for IDS SLB.
>>Real Server Group 50# ids ena
11. Select the rport for the IDS group.
>>Real Server Group 50# idsrprt 80
12. Enable IDS on the client and server ports. This enables frames ingressing the traffic ports to be
copied to the IDS servers.
/cfg/slb/port 4/ids ena
>>SLB port 4# /cfg/slb/port 7 ids ena
>>SLB port 7# /cfg/slb/port 8 ids ena
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Set OID to health check port 2)
(Set the IP interface for Alteon 2)
(Set OID to health check port 3 on Alteon 2)
(Set OID to health check port 4 on Alteon 2)
(Define a group)
(Add IDS Server 1)
(Add IDS Server 2)
(Add IDS Server 3)
(Add IDS Server 4)
(Enable IDS processing for port 4)
(Enable IDS processing for port 7)
(Enable IDS processing for port 8)
Load Balancing Special Services
321