Alteon Application Switch Operating System Application Guide
Application Redirection
Figure 69: RTSP Cache Redirection Configuration
1. Before configuring RTSP, do the following:
—
Connect each cache server to Alteon
—
Configure the IP addresses on all devices connected to Alteon
—
Configure the IP interfaces on Alteon
2. Configure RTSP cache servers and the IP addresses on Alteon.
>> # /cfg/slb/real 1
>> Real server 1# rip 1.1.1.1
>> Real server 1# ena
>> Real server 1# /cfg/slb/real 2
>> Real server 2# rip 1.1.1.2
>> Real server 2# ena
>> Real server 2# /cfg/slb/real 3
>> Real server 3# rip 1.1.1.3
>> Real server 3# ena
>> Real server 3# /cfg/slb/real 4
>> Real server 4# rip 1.1.1.4
>> Real server 4# ena
3. Define a group to load balance the RTSP cache servers.
>> # /cfg/slb/group 1
>> Real Server Group 1# add 1
>> Real Server Group 1# add 2
462
(Configure RTSP Cache Server 1)
(Enable RTSP Cache Server 1)
(Configure RTSP Cache Server 2)
(Enable RTSP Cache Server 2)
(Configure RTSP Cache Server 3)
(Enable RTSP Cache Server 3)
(Configure RTSP Cache Server 4)
(Enable RTSP Cache Server 4)
(Add RTSP Cache Server 1 to Group 1)
(Add RTSP Cache Server 2 to Group 1)
Document ID: RDWR-ALOS-V2900_AG1302