Radware Alteon Application Manual page 210

Alteon Application Switch Operating System Application Guide
Server Load Balancing
2. Configure VLAN for Interface 3.
>> Main# /cfg/l2/vlan 3
>> VLAN 3# ena
>> VLAN 3# add 13
Port 13 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 3 [y/n]: y
>> VLAN 3# add 14Port 14 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 3 [y/n]: y
>> VLAN 3# add 15Port 15 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 3 [y/n]: y
3. Configure the IPv4 network interface for the real servers.
>> Main# /cfg/l3/if 3
>> Interface 3# ena
>> Interface 3# ipver v4
>> Interface 3# addr 30.1.1.1
>> Interface 3# mask 255.255.255.0
>> Interface 3# broad 30.1.1.255
>> Interface 3# vlan 3
4. Configure the IPv6 default gateway.
>> Main# /cfg/l3/gw 5
>> Default gateway 5# ena
>> Default gateway 5# ipver v6
>> Default gateway 5# addr 2005:0:0:0:0:0:0:24
>> Default gateway 5# vlan 1
5. Configure the IPv6 virtual server IP address.
>> Main# /cfg/slb/virt 1
>> Virtual Server 1# ena
>> Virtual Server 1# ipver v6
>> Virtual Server 1# vip 2005:0:0:0:0:0:0:100
6. Assign the HTTP service to virtual server.
>> Main# /cfg/slb/virt 1/service http
>> Virtual Server 1 http Service# group 1
7. Enable SLB.
>> Main# /cfg/slb/on
210
Document ID: RDWR-ALOS-V2900_AG1302