Radware Alteon Application Manual page 679

— Filter 20 prevents VRRP traffic (and other multicast traffic on the reserved 224.0.0.0/24
network) from being redirected.
— Filter 2048 redirects the remaining traffic to the firewall group.
>> # /cfg/slb/filt 10
>> # dip 195.1.1.0
>> # dmask 255.255.255.0
>> # ena
>> # /cfg/slb/filt 20
>> # dip 224.0.0.0
>> # dmask 255.255.255.0
>> # ena
>> # /cfg/slb/filt 2048
>> # action redir
>> # group 1
>> # ena
>> # /cfg/slb/port 1
>> # filt ena
>> # add 10
>> # add 20
>> # add 2048
3. Configure VRRP on the primary dirty-side Alteon. VRRP in this example requires two virtual
routers: one for the subnet attached to the routers and one for the subnet attached to the
firewalls.
>> # /cfg/l3/vrrp 2
>> # on
>> # vr 1
>> # vrid 1
>> # addr 195.1.1.9
>> # if 1
>> # prio 101
>> # share dis
>> # ena
>> # track
>> # ifs ena
>> # ports ena
>> # /cfg/l3/vrrp/vr 2
>> # vrid 2
>> # addr 10.10.2.0
>> #if 2
>> # prio 101
>> # share dis
>> # ena
>> # track
>> # ifs ena
>> # ports ena
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Configure Virtual Router 1)
(For the subnet attached to the
routers)
(Configure Virtual Router 2)
(For the subnet attached to the
firewall)
Firewall Load Balancing
679