Radware Alteon Application Manual page 276

Alteon Application Switch Operating System Application Guide
Server Load Balancing
>> Main# /cfg/slb/accel/compress/urllist myurllist
>> Compression URL Rule-List myurllist#
>> Compression URL Rule-List myurllist# ena
4. Globally enable compression.
>> Main# /cfg/slb/accel/compress/on
5. Set the HTTP virtual service to used in the defined virtual server.
>> Main# /cfg/slb/virt 1/service 80/http/comppol
>> HTTP Load Balancing# comppol myPol
6. Enable DAM or configure proxy IP addresses and enable proxy on the client port.
Example 3: Configuring a Compression Service with a Compression Browser
Exception Rule List
1. Before you can configure a compression service, ensure that Alteon is configured for basic SLB:
— Assign an IP address to each of the real servers in the server pool.
— Define an IP interface.
— Define each real server.
— Assign servers to real server groups.
— Enable SLB.
— Define server port and client port.
— Define virtual server
For more information on how to configure your network for SLB, see
page 165.
2. Define the compression policy which will govern the compression behavior:
>> Main# /cfg/slb/accel/compress/comppol myPol
>> Compression Policy myPol# brwslist mybrwslist
>> Compression Policy myPol# ena
For details on defining additional compression policy parameters, see the section on the
/cfg/slb/accel/compress/comppol
System Command Reference.
3. Define a compression browser exception rule list.
>> Main# /cfg/slb/accel/compress/
276
menu in the Alteon Application Switch Operating
brwslist mybrwslist
Document ID: RDWR-ALOS-V2900_AG1302
(Define an alphanumeric ID to
identify the URL exception rule
list)
(Add a rule to the rule list)
(Enable the URL List)
(Define HTTP service)
(Associate the defined
compression policy)
Server Load Balancing,
(Define an alphanumeric ID to
identify the compression policy)
(Associate a browser rule list)
(Enable the policy)
(Define an alphanumeric ID to
identify the URL exception rule
list)