Radware Alteon Application Manual page 525

>> Main # /cfg/l3/vrrp/vr 2/ena
>> Main # /cfg/l3/vrrp/vr 2/vrid 35
>> Main # /cfg/l3/vrrp/vr 2/if 2
>> Main # /cfg/l3/vrrp/vr 2/prio 101
>> Main # /cfg/l3/vrrp/vr 2/addr 10.10.20.254
2. On the standby Alteon, copy these active Alteon settings, but lower the priority of each virtual
router.
>> Main # /cfg/l3/vrrp/on
>> Main # /cfg/l3/vrrp/vr 1
>> Main # /cfg/l3/vrrp/vr 1/ena
>> Main # /cfg/l3/vrrp/vr 1/vrid 25
>> Main # /cfg/l3/vrrp/vr 1/if 1
>> Main # /cfg/l3/vrrp/vr 1/prio 100
>> Main # /cfg/l3/vrrp/vr 1/addr 10.10.10.254
>> Main # /cfg/l3/vrrp/vr 2
>> Main # /cfg/l3/vrrp/vr 2/ena
>> Main # /cfg/l3/vrrp/vr 2/vrid 35
>> Main # /cfg/l3/vrrp/vr 2/if 2
>> Main # /cfg/l3/vrrp/vr 2/prio 100
>> Main # /cfg/l3/vrrp/vr 2/addr 10.10.20.254
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Enable the virtual router)
(Set the virtual router ID)
(Select a device IP interface)
(Set the priority bias for the virtual
router)
(Set the virtual router IP address)
(Enable VRRP)
(Specify the virtual router number for
VLAN 10 at interface 1)
(Enable the virtual router)
(Set the virtual router ID)
(Select a device IP interface)
(Set the priority bias for the virtual
router)
(Set the virtual router IP address)
(Specify the virtual router number for
VLAN 20 at interface 2)
(Enable the virtual router)
(Set the virtual router ID)
(Select a device IP interface)
(Set the priority bias for the virtual
router)
(Set the virtual router IP address)
High Availability
525