Radware Alteon Application Manual page 645

2. Add HTTP and FTP services for the virtual server.
>> # /cfg/slb/virt 2
>> Virtual Server 2# service 80
>> Virtual Server 2 HTTP Service# ena
>> Virtual Server 2 HTTP Service# group 3
>> Virtual Server 2 HTTP Service#..
>> Virtual Server 2# service ftp
>> Virtual Server 2 ftp Service# ena
>> Virtual Server 2 ftp Service# group 3
Step 6—Configure Alteon as a Domain Name Server
Define the domain record name and map the virtual server and real server (ISP router) for each
WAN link.
1. Configure the domain record to behave as a Domain Name Server.
>> # /cfg/slb/linklb/drecorcd 1
>> Domain record 1# domain radware.com
>> Domain Record 1# ena
2. Configure an entry for each ISP and specify the virtual server and real server (ISP router).
You must map the domain record, radware.com, to each ISP. Each ISP has two parameters: a
virtual IP address and a real server IP address. The virtual IP address is used to respond to the
DNS query for the radware.com domain. The real server IP address is used to measure the ISP
load and ISP health. These commands map the two parameters to the ISP link.
>> Domain record 1# entry 1/ena
>> Virt Real Mapping virt 1
>> Virt Real Mapping# real 1
>> Domain record 1# entry 2/ena
>> Virt Real Mapping# virt 2
>> Virt Real Mapping# real 2
Step 7—Apply and Save Your Changes
You must apply your changes in order for them to take effect, and you must save changes if you
want them to remain in effect after reboot.
1. Apply and verify the configuration.
>> Layer 4# apply
>> Layer 4# cur
Examine the resulting information. If any settings are incorrect, make the appropriate changes.
2. Save your new configuration changes.
>> Layer 4# save
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Select the virtual server)
(Add the HTTP service)
(Enable the service)
(Add real server group)
(Go to the virtual server menu)
(Add the FTP service)
(Enable the service)
(Add real server group)
(Select the domain record menu)
(Define the domain name)
(Enable the domain)
(Define entry for ISP 1)
(Select virtual server 1 for ISP 1)
(Select real server for ISP 1)
(Define entry for ISP 2)
(Select virtual server 2 for ISP 2)
(Select real server for ISP 2)
WAN Link Load Balancing
645