Secure Socket Layer (Ssl) Slb; Associating An Ssl Policy To A Virtual Service - Radware Alteon Application Manual

Application switch operating system
Hide thumbs Also See for Alteon:
Table of Contents

Advertisement

9. Apply and save your configuration.
>> Real server 8# apply
>> Real server 8# save
Clients retrieving RTSP://Globalnews.com/saleswebcast.rm hash to the same media server—1,
2, 3, or 4.
A client request of the form RTSP://120.10.10.20/../Globalnews1.mov is load balanced between
RTSP Servers 5 and 6 using string matching. A client request of the form RTSP://120.10.10.20/
../Globalnews2.mov is load balanced between RTSP Servers 7 and 8.

Secure Socket Layer (SSL) SLB

Alteon can provide SSL offloading services to any application. For HTTP over SSL (HTTPS), Alteon
offers comprehensive support (see
other applications that do not require special SSL support, Alteon can provide simple SSL offloading
where the SSL is decrypted and forwarded to the servers.
Applications that require special SSL support and are not supported by Alteon include FTPS, POPS,
SMTPS.
For Alteon to perform SSL offloading, you must define an SSL virtual service and associate both a
server certificate and an SSL policy to it. As with other Alteon features, the virtual service is
assigned to an application, in this case either HTTPS or another protocol encrypted by SSL.
For details on defining SSL policies, see
certificates, see
Certificate Repository, page
The following procedures are discussed in this section:
Associating an SSL Policy to a Virtual Service, page 299
Associating a Server Certificate to a Virtual Service, page 300

Associating an SSL Policy to a Virtual Service

When configuring an SSL virtual service, you must associate an SSL policy which defines the SSL
behavior.
To associate an SSL Policy to a virtual service
1. Access the Virtual Server Service menu for the virtual service to which you want to associate an
SSL policy. In this example, Virtual Server 1 is associated with a general SSL application.
>> Main# /cfg/slb/virt 1/service 12345/ssl/sslpol
2. Enter a new SSL policy ID (1 to 32 characters).
Current SSL policy:
Enter new SSL policy or none:
The following message displays
For SSL policy configuration use /cfg/slb/ssl/sslpol
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
Offloading SSL Encryption and Authentication, page
SSL Policies, page
338.
Load Balancing Special Services
338. For details on defining server
337). For
299

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents