Radware Alteon Application Manual page 365

To redirect traffic with a transparent server
1. Configure Filter 10 to redirect traffic to Real Server Group 10 (VAS server).
>> # /cfg/slb/filt 10
>> Filter 10# sip 1.1.0.0
>> Filter 10# smask 255.255.0.0
>> Filter 10# dip any
>> Filter 10# dmask 0.0.0.0
>> Filter 10# proto tcp
>> Filter 10# sport any
>> Filter 10# dport http
>> Filter 10# action redirect
>> Filter 10# group 10
>> Filter 10# vlan any
>> Filter 10# ena
2. Configure Filter 20 to allow client traffic to browse the Web.
>> # /cfg/slb/filt 20
>> Filter 20# sip any
>> Filter 20# smask 0.0.0.0
>> Filter 20# dip any
>> Filter 20# dmask 0.0.0.0
>> Filter 20# ipver v4
>> Filter 20# action allow
>> Filter 20# vlan any
>> Filter 20# ena
3. Configure Filter 20 to enable the Return to Source MAC address option. This adds an opposite
entry in the session table so that the return traffic matches its source MAC address.
>> # /cfg/slb/filt 20/adv
>> Filter 20 Advanced# rtsrcmac ena
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Select the menu for Filter 10)
(From a specific source IP address)
(From a specific source IP mask)
(To any network destination address)
(For any subnet range)
(For TCP protocol traffic)
(From any source port)
(To any HTTP destination port)
(Redirect matching traffic)
(Redirect to Real Server Group 10)
(To any VLAN)
(Enable the filter)
(Select the menu for Filter 20)
(From any source IP address)
(From any source IP mask)
(To any network destination address)
(For any subnet range)
(Set filter IP version to IP Version 4)
(Allow matching traffic to pass)
(To any VLAN)
(Enable the filter)
(Select the Advanced menu for Filter 20)
(Enable Return to Source MAC Address)
Filtering and Traffic Manipulation
365