Radware Alteon Application Manual page 221

To configure URL-based SLB
1. Before you can configure SLB string-based load balancing, ensure that Alteon is configured for
basic SLB with the following tasks:
— Assign an IP address to each of the real servers in the server pool.
— Define an IP interface.
— Define each real server.
— Define a real server group containing all servers (1 through 4), and set up health checks for
the group.
— Define a virtual server with a virtual service on port 80 (HTTP), and assign the real server
group to service it. This will be the group servicing all "other" requests (not "cgi" or
"images") containing Real Servers 1 through 4.
— Enable SLB.
— Enable client processing on the port connected to the clients.
For information on how to configure your network for SLB, see
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
Server Load Balancing, page
Server Load Balancing
165.
221