Radware Alteon Application Manual page 739

6. Enable client and server processing.
>> # /cfg/slb/port 1
server ena
>> # /cfg/slb/port 8
client ena
server ena
7. Configure virtual IP for the local site.
>> # /cfg/slb/virt 1
ena
ipver v4
vip 174.14.70.100
dname "radware.com"
8. Enable virtual service with dbind and client proximity.
>> # /cfg/slb/virt 1/service http
group 1
dbind ena
>> # /cfg/slb/virt 1/service http/http
clntprox http
9. Configure the interfaces of the remote site for DSSP updates.
>> # /cfg/slb/gslb/site 1
ena
prima 210.10.10.1
>> # /cfg/slb/gslb/site 2
ena
prima 201.2.2.201
10. Create a static entry for each remote site with local VIP as the closest site. This prevents client
proximity calculation for health check packets.
>> # /cfg/slb/gslb/network 1
ena
sip 210.10.10.1
mask 255.255.0.0
addvirt 1 1
>> # /cfg/slb/gslb/network 2
ena
sip 201.2.2.201
mask 255.255.0.0
addvirt 1 1
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Enable server processing)
(Enable client processing)
(Enable server processing for health
packet in this port)
(Configure virtual server)
(Local VIP – Site B)
(Assign domain name)
(Enable delayed binding for HTTP
service)
(Enable Client proximity for HTTP/
HTTPS service)
(Enable Site A)
(Remote Site Interface IP)
(Enable Site C)
(Remote Site Interface IP)
Global Server Load Balancing
739