Radware Alteon Application Manual page 259

— Path—Path Action Type can be set to Insert, Replace, or Remove.
• Insert—Lets you insert additional text to the path, either before or after the matched
text.
• Replace—Lets you replace the matched text in the path with another text.
• Remove—Lets you remove the matched text from the path.
• None—No action is taken.
Replace and Remove are not allowed when the Path Match Type is set to Any.
When using a path match, an action must be specified. To use path match as match criteria
only and leave the same path, use the replace action with the same text string used in the
match.
For example: Path Match Type include, and Path to Match abc match any path that contains
abc, such as /abc/, /a/abc, and so on. Using Path Action Remove results in the following:
path abc is removed, path de/abc/xyz is modified to de/xyz.
— Page Name—A new page name. Leave this action empty to remove the matched page
name. When both match and action are empty, no operation is performed.
— Page Type— A new page type. Leave this action empty to remove the matched page type.
When both match and action are empty, no operation is performed.
Example 1: Update the Path
The web site links should be updated as follows:
Every link that ends with cars should now be updated to end with new-cars. For example, the URL
HTTP://www.site.com/vehicles/offer-cars/details.html should now be
HTTP://www.site.com/vehicles/offer-new-cars/details.html.
Note: The numbers and names in this procedure are examples only.
1. Configure the required real servers, group, virtual server and service. The service is HTTP or
HTTPS, according to the site. Associate an HTTP modification policy to achieve the HTTPS link
updates.
>> HTTP Load Balancing Menu # httpmod
Current HTTP modifications rule-list:
Enter new HTTP modifications rule-list or none: add-new
>>For HTTP Modification rule-list configuration use /cfg/slb/layer7/httpmod
2. Create the HTTP modifications rule list:
>> Main # /cfg/slb/layer7/httpmod
>> Enter HTTP Modification rule-list id (alphanumeric): add-new
3. One rule is required. In this example, Rule 10 is added:
>>URL Modification rule-list add-new#
>>Enter HTTP Modification rule number (1-128): 10
>>Element can be one of: url, header, cookie, filetype, statusline, text
>>Enter element to be modified: URL
>>URL Modification add-new Rule 10#
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
Server Load Balancing
259