Setting Up User Ids; Defining User Names And Passwords; Changing Passwords; Defining User Access Level - Radware Alteon Application Manual

Setting up User IDs

To set up a user ID
You can configure up to 10 user IDs. For example:
/cfg/sys/access/user/uid 1

Defining User Names and Passwords

To define user names and passwords
The following is an example for defining a user name and password:
>> User ID 1 # name jane
Current user name:
New user name:

Changing Passwords

To change passwords
The following is an example for changing passwords:
>> User ID 1 # pswd
Changing user password; validation required:
Enter current admin password: <current administrator password>
Enter new user password: <new user password>
Re-enter new user password: <new user password>
New user password accepted.

Defining User Access Level

By default, the end user is assigned to the user access level (also known as class of service, or CoS).
The CoS for all user accounts has global access to all resources except for User CoS, which has
access to view resources that only the user owns. For more information, see
Accounts and Access Levels, page
To change the user's level
Enter the class of service cos command, and select one of the following options:
>> User ID 1 # cos <user|slboper|l4oper|oper|slbadmin|l4admin|admin>
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
jane
64.
Securing Alteon
Table 3 - Alteon User
77