Radware Alteon Application Manual page 648

Alteon Application Switch Operating System Application Guide
WAN Link Load Balancing
>> # /cfg/vlan 1/def 1
>> # /cfg/vlan 5/ena
>> # /cfg/vlan 5/def 5
>> # /cfg/stp 1/off
>> # /cfg/stp 1/clear
>> # /cfg/stp 1/add 1 25 26 5
4. Configure the IP interfaces on Alteon.
>> # /cfg/if 1
>> IP Interface 1# ena
>> IP Interface 1# addr 1.1.1.1
>> IP Interface 1# mask 255.255.255.0
>> IP Interface 1# broad 1.1.1.255
>> IP Interface 1# vlan 1
>> # /cfg/if 2
>> IP Interface 2# ena
>> IP Interface 2# addr 50.1.1.2
>> IP Interface 2# mask 255.255.255.0
>> IP Interface 2# broad 50.1.1.255
>> IP Interface 2# vlan 2
>> # /cfg/if 7
>> IP Interface 7# ena
>> IP Interface 7# addr 80.1.1.2
>> IP Interface 7# mask 255.255.255.0
>> IP Interface 7# broad 80.1.1.255
>> IP Interface 7# vlan 7
Step 2—Configure the Load Balancing Parameters for ISP Routers
On Alteon, configure the ISP routers as if they were real servers, with SLB parameters: real servers,
group, metric, and health.
1. Configure IP addresses for WAN link routers.
>> # /cfg/slb/real 1/rip 50.1.1.1
>> Real server 1# ena
>> Real server 1# proxy dis
>> # /cfg/slb/real 2/rip 80.1.1.1
>> Real server 2# ena
>> Real server 2 # adv
>> Real server 2 Advanced# proxy dis
Proxy is disabled on the real servers, because link load balancing and full NAT cache redirection
cannot coexist.
648
(Add port 1 to VLAN 1)
(Enable VLAN 5)
(Add port 5 to VLAN 5)
(Disable STP)
(Clear STP)
(Add ports 1, 25, 26, 5 to STP 1)
(Define interface 1)
(Enable interface 1)
(Define the IP address for interface 1)
(Define the mask for interface 1)
(Define the broadcast for interface 1)
(Specify the VLAN for interface 1)
(Define interface 2)
(Enable interface 2)
(Define the IP address for interface 2)
(Define the mask for interface 2)
(Define the broadcast for interface 2)
(Specify the VLAN for interface 2)
(Define interface 7)
(Enable interface 7)
(Define the IP address for interface 7)
(Define the mask for interface 7)
(Define the broadcast for interface 7)
(Specify the VLAN for interface 7)
(Define IP address for WAN link 1)
(Enable real server 1)
(Disable proxy)
(Define IP address for WAN link 2)
(Enable real server 2)
(Select the advance menu)
(Disable proxy)
Document ID: RDWR-ALOS-V2900_AG1302