Radware Alteon Application Manual page 641

>> # /cfg/port 25/pvid
>> # /cfg/l2/stg 1/port 1257
3. Configure the IP interfaces on Alteon. Alteon must have an IP route to all of the real servers that
receive switching services. For load balancing the traffic, Alteon uses this path to determine the
level of TCP/IP reach of the WAN links.
>> Main # /cfg/l3/if 2
>> IP Interface 2 # ena
>> IP Interface 2# addr 50.1.1.2
>> IP Interface 2# mask 255.255.255.0
>> IP Interface 2# broad 50.1.1.255
>> IP Interface 2 # vlan 2
>> Main # /cfg/l3/if 7
>> IP Interface 7# ena
>> IP Interface 7# addr 80.1.1.2
>> IP Interface 7# mask 255.255.255.0
>> IP Interface 7# broad 80.1.1.255
>> IP Interface 7# vlan 7
>> Main # /cfg/l3/if 1
>> IP Interface 1# ena
>> IP Interface 1# addr 1.1.1.1
>> IP Interface 1# mask 255.255.255.0
>> IP Interface 1# broad 1.1.1.255
>> IP Interface 1# vlan 1
>> Main # /cfg/l3/if 5
>> IP Interface 5# ena
>> IP Interface 5# addr 2.2.2.1
>> IP Interface 5# mask 255.255.255.0
>> IP Interface 5# broad 2.2.2.255
>> IP Interface 5# vlan 5
Step 2—Configure the Load Balancing Parameters for ISP Routers
Configure the ISP routers with load balancing parameters: real servers, group, metric, and health.
1. Configure IP addresses for WAN link routers.
Proxy is disabled on the real servers, so that the original destination IP address is preserved.
>> # /cfg/slb/real 1/rip 50.1.1.1
>> Real server 1# ena
>> Real server 1# proxy dis
>> # /cfg/slb/real 2/rip 80.1.1.1
>> Real server 2# ena
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Clear STG)
(Add ports 1, 2, 5, and 7 to STG 1)
(Define interface 2 for ISP 1)
(Enable interface 2)
(Define the IP address for interface 2)
(Define the mask for interface 2)
(Define the broadcast for interface 2)
(Specify the VLAN for interface 2)
(Define interface 7 for ISP 2)
(Enable interface 7)
(Define the IP address for interface 7)
(Define the mask for interface 7)
(Define the broadcast for interface 7)
(Specify the VLAN for interface 7)
(Define interface 1 for Real server 3)
(Enable interface 1)
(Define the IP address for interface 1)
(Define the mask for interface 1)
(Define the broadcast for interface 1)
(Specify the VLAN for interface 1)
(Define interface 5 for internal client)
(Enable interface 5)
(Define the IP address for interface 5)
(Define the mask for interface 5)
(Define the broadcast for interface 5)
(Specify the VLAN for interface 5)
(Define IP address for WAN link 1)
(Enable real server 1)
(Disable proxy)
(Define IP address for WAN link 2)
(Enable real server 2)
WAN Link Load Balancing
641