Radware Alteon Application Manual page 224

Alteon Application Switch Operating System Application Guide
Server Load Balancing
>> Virtual Server 10 80 http Service# cntrules
Enter Content Based Services Rule number (1-12800):
------------------------------------------------------------
[HTTP Content Rule 5 Menu]
name - Set descriptive content rule name
cntclss - Set content class for this rule
action - Set action type for this rule
group - Set real server group number for this rule
redirect - Set application redirection location for this rule
copy - Copy rule
ena - Enable rule
dis - Disable rule
del - Delete rule
cur - Display current rule configuration
>> HTTP Content Rule 5# name
Current descriptive content rule name:
Enter new descriptive content rule name: cgi rule
>> HTTP Content Rule 5# cntclss
Current content class:
Enter new content class or none: <<< Hit TAB to get list of all HTTP content
classes
a cgi images my-class
Enter new content class or none: cgi
For content class updates use /cfg/slb/layer7/slb
>> HTTP Content Rule 5# action
Current action type:
Enter new action type [group|redirect|discard] : group
>> HTTP Content Rule 5# group
Current real server group: 1
Enter new real server group [1-1024]: 2
— Define a similar content switching rule to match the "image" class, and redirect traffic to the
group of Real Servers 3 and 4.
Tip: Because the content switching rule ID serves as rule matching priority, Radware recommends
that you leave a gap between rule numbers that you create so you can easily place future rules
within the current hierarchy. For example, create rules 1, 5, and 10 in the event that new rule 3
should be placed between rules 1 and 5, or new rule 7 should be placed between rules 5 and 10. If
you need to move a rule to a different ID, use the copy command. This creates a copy of the rule
from within the command that was used with a new ID, after which you can delete the original rule
ID.
224
secure
group
5
Document ID: RDWR-ALOS-V2900_AG1302