Radware Alteon Application Manual page 327

Figure 51: SIP Load Balancing Configuration Example
To configure SIP load balancing
1. Before you start configuring SIP load balancing:
— Connect each SIP proxy server to Alteon
— Configure the IP addresses on all devices connected to Alteon
— Configure the IP interfaces on Alteon
— Enable Direct Access Mode (DAM)
— Disable proxy IP addressing
2. Enable server load balancing.
>> # /cfg/slb/on
3. Configure IP addresses for the SIP proxy servers.
>> # /cfg/slb/real 1/rip 10.10.10.1
>> Real server 1# ena
>> # /cfg/slb/real 2/rip 10.10.10.2
>> Real server 2# ena
>> # /cfg/slb/real 3/rip 10.10.10.3
>> Real server 3# ena
4. Create a group to load balance the SIP proxy servers.
>> # /cfg/slb/group 100
>>Real Server Group 100# add 1
>>Real Server Group 100# add 2
>>Real Server Group 100# add 3
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Define address for MCS 1)
(Enable Real Server 1)
(Define address for MCS 2)
(Enable Real Server 2)
(Define address for MCS 3)
(Enable Real Server 3)
(Define a group)
(Add Real Server 1)
(Add Real Server 2)
(Add Real Server 3)
Load Balancing Special Services
327