Radware Alteon Application Manual page 628

Alteon Application Switch Operating System Application Guide
Advanced Denial of Service Protection
7. Enable the rule.
/cfg/slb/layer7/rule 1/ena
8. Enable SIPs in the filter.
/cfg/slb/filt/adv/layer7/sip/sips ena
9. Enable pattern matching in the filter.
/cfg/slb/filt/adv/security/pmatch ena
10. Add the filter on the port. Enable filter on the server port if reverse lookup for SIP UDP rule is
configured.
/cfg/slb/port <port number>/filt ena/add <filter number>
Example Configuration of FlexiRules
1. Configure contracts.
/cfg/bwm
on
/cfg/bwm/cont 1
ena
pol 1
/cfg/bwm/pol 1
hard 0k
soft 0k
resv 0k
userlim 0k
2. Create Rule 1.
/cfg/slb/layer7/rule 1
ena
hdrfld from
content "bob"
message "from_has_bob"
contract 1
severity 3
628
(Select BWM)
(Enable BWM)
(Select the contract)
(Enable the contract)
(Set contract policy)
(Select the policy)
(Set the hard limit)
(Set the soft limit)
(Set the reservation limit)
(Set the user limit)
(Select Rule 1)
(Enable Rule 1)
(Enter the header field name)
(Enter the content of the header
field)
(Enter the alert message)
(Select the contract)
(Select the highest severity)
Document ID: RDWR-ALOS-V2900_AG1302