Radware Alteon Application Manual page 629

3. Create rule 99.
/cfg/slb/layer7/rule 99
ena
hdrfld to
content "Sam"
message "to_is_sam"
severity 5
4. Create rule 100.
/cfg/slb/layer7/rule 100
ena
hdrfld sdpcontent
content "string"
message "domain is alteon"
severity 4
5. Add dependent rules 99 and 100 to rule 1.
addrule 100
addrule 99
After creating the rules, when Bob calls Sam, Rule 1 and Rule 99 are matched and Alteon takes
the action of Rule 99. Alteon takes the action of Rule 1 only when Rule 100 is also matched. Until
rule 100 is matched in the return traffic, Alteon rate limits the traffic according to Rule 99.
The following is an example of the logs:
Nov 12 19:27:33 NOTICE
from_has_bob
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
security: 10:10.1.1.10:5060->10.1.1.21 rid1 deny
Advanced Denial of Service Protection
(Select Rule 99)
(Enable Rule 99)
(Enter the header field name)
(Enter the content of the header
field)
(Enter the alert message)
(Select the severity)
(Select Rule 100)
(Enable Rule 100)
(Enter the header field name)
(Enter the content of the header
field)
(Enter the alert message)
(Select the severity)
629