Radware Alteon Application Manual page 545

>> Main# /cfg/slb/real 1/
>> Real server 1# rip 10.10.10.101
>> Real server 1# /cfg/slb/real 2/rip 10.10.10.102
>> Real server 2# /cfg/slb/real 3/rip 10.10.10.103
>> Real server 3# /cfg/slb/real 4/rip 10.10.10.104
>> Real server 3# /cfg/slb/group 1
>> Real server group 1# add 1
>> Real server group 1# add 2
>> Main # /cfg/slb/virt 1/vip 205.178.13.226
>> Virtual server 1# ena
>> Virtual server 1# service http
>> Virtual server 1 http Service# group 1
>> Main # /cfg/slb/group 2
>> Real server group 1# add 3
>> Real server group 1# add 4
>> Main # /cfg/slb/virt 1/vip 205.178.13.300
>> Virtual server 1# ena
>> Virtual server 1# service http
>> Virtual server 1 http Service# group 2
4. Configure virtual interface routers 1 and 3, and make sure to disable sharing.
These virtual routers are assigned the same IP address as the IP interfaces configured in
resulting in Alteon recognizing these as virtual interface routers (VIRs). In this example, Layer 3
bindings are left in their default configuration (disabled). For an active-standby configuration,
sharing is disabled.
>> Main # /cfg/l3/vrrp/vr 1
>> VRRP Virtual Router 1# vrid 1
>> VRRP Virtual Router 1# addr 200.200.200.100
>> VRRP Virtual Router 1# if 1
>> VRRP Virtual Router 1# share dis
>> VRRP Virtual Router 1# ena
>> Main # /cfg/l3/vrrp/vr 3
>> VRRP Virtual Router 3# vrid 3
>> VRRP Virtual Router 3# addr 200.200.200.103
>> VRRP Virtual Router 3# if 3
>> VRRP Virtual Router 3# share dis
>> VRRP Virtual Router 3# ena
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Configure real servers)
(Select Real Server Group 1)
(Add Real Server 1 to Group 1)
(Add Real Server 2 to Group 1)
(Configure Virtual Server IP 1)
(Enable the virtual server)
(Select the HTTP Service Port
menu)
(Associate the virtual port to real
group)
(Add Real Server 1 to Group 1)
(Add Real Server 2 to Group 1)
(Enable the virtual server)
(Select the HTTP service menu)
(Associate the virtual port to real
group)
(Select Virtual Router 1)
(Set the virtual router ID)
(Assign the VR IP address)
(Assign the virtual router
interface)
(Disable sharing of interfaces)
(Enable Virtual Router 1)
(Select Virtual Router 3)
(Set the virtual router ID)
(Assign VR IP address)
(Assign the virtual router
interface)
(Disable sharing of interfaces)
(Enable Virtual Router 3)
High Availability
step 1,
545