Radware Alteon Application Manual page 425

You can add VLANs using one of the following syntaxes:
— vlan1 vlan2 vlan3 (one by one)
— vlan1-vlan3 vlan4 (range and list)
>> vADC 4# add 101-102 104
Current vADC 4 Layer2 interfaces:
Pending new vADC 4 Layer2 interfaces:
>> vADC 4# add 103
Current vADC 4 Layer2 interfaces:
Pending new vADC 4 Layer2 interfaces:
>> Global - vADC allowed IP networks# add
Enter allowed network number: 1
Current VLAN Number: 0
Pending new VLAN Number: 100
Enter new VLAN Number [1-4090]: 100
Enter new IP version[v4, v6]: v4
Current Network IP address: 0.0.0.0
Enter new Network IP address: 192.168.1.0
Current Network Mask: 0.0.0.0
Enter new Network Mask: 255.255.255.0
Current Settings:
vADC 1 allowed networks:
No allowed IP networks configured.
New Settings:
vADC 1 allowed networks:
Current IPv4 allowed networks:
Id Vlan NetAddress
---- ---- ---------------
1 100 192.168.1.0
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
101 102 104
101-104
NetMask
---------------
255.255.255.0
ADC-VX Management
425