Radware Alteon Application Manual page 160

Alteon Application Switch Operating System Application Guide
Open Shortest Path First (OSPF)
>> # /cfg/slb/real 1
>> Real server 1 # rip 100.100.100.25
>> Real server 1 # ena
>> Real server 1 # /cfg/slb/real 2
>> Real server 2 # rip 100.100.100.26
>> Real server 2 # ena
>> Real server 2 # /cfg/slb/group 1
>> Real server group 1 # add 1
>> Real server group 1 # add 2
>> Real server group 1 # enable
>> Real server group 1 # /cfg/slb/on
3. Configure client and server processing on specific ports.
>> Layer 4 # /cfg/slb/port 4
>> SLB Port 4 # client ena
>> SLB Port 4 # /cfg/slb/port 5
>> SLB Port 5 # server ena
4. Enable direct access mode.
>> Layer 4 Port 5 # /cfg/slb/adv
>> Layer 4 Advanced # direct ena
>> Layer 4 Advanced# ...
5. Configure the primary virtual server. Alteon 1 is preferred for virtual server 10.10.10.1.
>> Layer 4 # /cfg/slb/virt
>> Virtual server 1 # vip 10.10.10.1
>> Virtual server 1 # ena
>> Virtual server 1 # service http
>> Virtual server 1 http service # group 1
6. Configure the backup virtual server. Alteon 1 acts as a backup for virtual server 10.10.10.2.
Both virtual servers in this example are configured with the same real server group and provide
identical services.
>> Virtual server 2 http service # /cfg/
slb/virt 2
>> Virtual server 1 # vip 10.10.10.2
>> Virtual server 1 # ena
>> Virtual server 1 # service http
>> Virtual server 1 http service # group 1
7. Enable OSPF on Alteon 1.
160
(Select menu for real server 1)
(Set the IP address for real server 1)
(Enable the real server)
(Select menu for real server 2)
(Set the IP address for real server 2)
(Enable the real server)
(Select menu for real server group 1)
(Add real server 1 to group)
(Add real server 2 to group)
(Enable the group)
(Turn SLB on)
(Select port 4)
(Enable client processing on port 4)
(Select port 5)
(Enable server processing on port 5)
(Select the SLB advance menu)
(Enable DAM)
(Return to the SLB menu)
(Select menu for virtual server 1)
(Set the IP address for virtual server 1)
(Enable the virtual server)
(Select menu for service on virtual server)
(Use real server group 1 for HTTP service)
(Select menu for virtual server 2)
(Set the IP address for virtual server 2)
(Enable the virtual server)
(Select menu for service on virtual server)
(Use real server group 1 for HTTP service)
Document ID: RDWR-ALOS-V2900_AG1302