Radware Alteon Application Manual page 777

• Policy 2 is for broadband customers with higher bandwidth allocation needs.
1. Select the first bandwidth policy for dialup customers. Each policy must have a number from 1
to 512. Ensure BWM is enabled on Alteon (
>> # /cfg/bwm/pol 1
2. Set the hard, soft, and reserved rate limits for the bandwidth policy, in Mbps.
>> Policy 1# hard 5
>> Policy 1# soft 4
>> Policy 1# resv 3
3. On Alteon, select a BWM contract and name the contract. Each contract must have a unique
number from 1 to 1024.
>> Policy 1# /cfg/bwm/cont 1
>> BWM Contract 1# name dial-up
4. Set the bandwidth policy for this contract. Each BWM contract must be assigned a bandwidth
policy.
>> BWM Contract 1# pol 1
5. Enable this BWM contract.
>> BWM Contract 1# ena
6. Select the second bandwidth policy for broadband customers.
>> BWM Contract 1# /cfg/bwm/pol 2
7. Set the hard, soft, and reserved rate limits for this policy, in Mbps.
>> Policy 2# hard 30
>> Policy 2# soft 25
>> Policy 2# resv 20
8. On Alteon, select the second BWM contract and name the contract.
>> Policy 2# /cfg/bwm/cont 2
>> BWM Contract 2# name broadband
9. Set the bandwidth policy for this contract. Each BWM contract must be assigned a bandwidth
policy.
>> BWM Contract 2# pol 2
10. Enable this BWM contract.
>> BWM Contract 2# ena
11. On Alteon, apply and verify the configuration.
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
).
/cfg/bwm/on
(Set "never exceed" rate)
(Set desired bandwidth rate)
(Set committed information rate)
(Set "never exceed" rate)
(Set desired bandwidth rate)
(Set committed information rate)
Bandwidth Management
777