Radware Alteon Application Manual page 721

8. Apply and save the configuration.
>> # apply
>> # save
9. Configure the local DNS server to recognize the local GSLB Alteon as the authoritative name
server for the hosted services.
Determine the domain name that will be distributed to both sites and the hostname for each
distributed service. In this example, the Denver DNS server is configured to recognize
174.14.70.2 (the IP interface of the Denver GSLB Alteon, configured with the domain name
"www.gslb.example.com") as the authoritative name server for "www.example.com."
To configure the Denver Alteon for Standard SLB
1. Assign an IP address to each of the real servers in the local Denver server pool, as defined in
Table 61:
Real Server
Server 11
Server 21
2. On the Denver Alteon, define each local real server.
>> Default gateway 1# /cfg/slb/real 11
>> Real server 11# rip 174.14.7.11
>> Real server 11# ena
>> Real server 11# /cfg/slb/real 21
>> Real server 21# rip 174.14.7.21
>> Real server 21# ena
3. On the Denver Alteon, define a real server group.
>> Real server 2# /cfg/slb/group 1
>> Real server group 1# add 11
>> Real server group 1# add 21
>> Real server group 1# health http
>> Real server group 1# content index.html
4. On the Denver Alteon, define a virtual server.
>> Real server group 1# /cfg/slb/virt 1
>> Virtual server 1# vip 174.14.70.200
>> Virtual server 1# service http
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
Table 61: Denver Real Server IP Addresses
IP address
174.14.7.11
174.14.7.21
Global Server Load Balancing
(Server C is Real Server 1)
(Assign IP address for Server 11)
(Enable Real Server 11)
(Server D is Real Server 21)
(Assign IP address for Server 21)
(Enable Real Server 21)
(Select Real Server Group 1)
(Add Real Server 11 to Group 1)
(Add Real Server 21 to Group 1)
(Use HTTP for health checks)
(Set URL content for health checks)
(Select Virtual Server 1)
(Assign IP address)
(Select the HTTP Service menu)
721