Radware Alteon Application Manual page 812

Alteon Application Switch Operating System Application Guide
Content-Intelligent Server Load Balancing Not Using Layer 7 Content Switching Rules
• /index.shtm
3. Apply and save your configuration changes.
4. Identify the defined string IDs.
>> # /cfg/slb/layer7/slb/cur
For easy configuration and identification, each defined string is assigned an ID number, as
shown below:
ID
1
2
3
4
5
6
5. Configure one or more real servers to support URL-based load balancing.
Add the defined strings to the real server, where ID is the identification number of the defined
string.
>> # /cfg/slb/real 2/layer7/addlb <ID>
Note: If you do not add a defined string (or add the defined string any) the server handles any
request.
A server can have multiple defined strings such as:
— /images
— /sales
— .gif
With these defined strings, this particular server can handle requests that start with
and any requests that contain
/sales
6. Enable SLB.
>> # /cfg/slb/on
7. Enable DAM or configure proxy IP addresses and enable proxy on the client port.
DAM and proxy IPs allow you to perform port mapping for URL load balancing.
— Enable DAM
>> # /cfg/slb/adv/direct ena
— Configure a proxy IP address and enable proxy on the client port.
>> # /cfg/slb/direct dis
>> # /cfg/slb/pip
812
SLB String
any
.gif
/sales
/xitami
/manual
.jpg
.
.gif
Document ID: RDWR-ALOS-V2900_AG1302
or
/images