Radware Alteon Application Manual page 179

To view the current buddy server settings for a real server
>> Main# /cfg/slb/real <real server number> /adv/buddyhc/cur
To configure buddy server health checking
1. Configure an interface.
>>Main# /cfg/l3/if 1/addr 10.1.11.1/mask 255.255.255.0/ena
2. Enable SLB
>>Main# /cfg/slb/on
3. Enable ports for SLB.
>> Main# /cfg/slb/port 2/server en
>> Main# /cfg/slb/port 3/server en
>> Main# /cfg/slb/port 4/server en
>> Main# /cfg/slb/port 5/server en
>> Main# /cfg/slb/port 6/server en
4. Configure and enable real servers.
>> Main# /cfg/slb/real 1/rip 10.1.11.30/ena
>> Main# /cfg/slb/real 2/rip 10.1.11.31/ena
>> Main# /cfg/slb/real 3/rip 10.1.11.32/ena
>> Main# /cfg/slb/real 4/rip 10.1.11.33/ena
>> Main# /cfg/slb/real 5/rip 10.1.11.34/ena
5. Configure real server groups and assign real servers to them.
>> Main# /cfg/slb/group 2/add 2
>> Main# /cfg/slb/group 2/add 3
>> Main# /cfg/slb/group 2/add 4
>> Main# /cfg/slb/group 2/add 5
>> Main# /cfg/slb/group 2/health tcp
6. Apply and save the configuration
>> Main# Apply
>> Main# Save
7. Configure virtual servers and enable HTTP service.
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
Server Load Balancing
179