Radware Alteon Application Manual page 444

Alteon Application Switch Operating System Application Guide
ADC-VX Management
>> Global - Boot Options#gtimg
Enter image type [all|vx|adc]: adc
ADC Application Images:
ID Version
-- -------
1 17:41:28 Sun Jan 13, 2013
2 28.1.0.0
3 28.1.0.2
4 28.1.0.3
5 28.1.0.4
6 28.1.0.5
7 28.1.0.6
8 -
9 28.3.0.0
10 28.4.0.0
Enter image ID to be replaced: (1-10) 8
Enter hostname or IP address of FTP/TFTP/SCP server: 10.210.31.39
Enter name of file on FTP/TFTP/SCP server: AAS-28.1.0.12--IF-AlteonOS
Enter username for FTP/SCP server or hit return for TFTP server:
Loading Infrastructure Images
The following describes how to load ADC-VX infrastructure images.
To add ADC-VX infrastructure settings
1. Access the Active Switch Configuration Boot menu.
>> Global - Main# /boot
------------------------------------------------------------
[Boot Options Menu]
single - Switch between ADC-VX
vadc - Restart selected vADC process
dimage - Select default image
image - Select software image to use on next boot
conf - Select config block to use on next boot
gtimg - Download new software image via FTP/TFTP/SCP
reset - Reset switch
cur - Display current boot options
logen - Enable/Disable Enhanced Log Size
2. Enter , and enter
gtimg
444
Downloaded
----------
12:45:39 Wed Mar 31, 2013
17:41:28 Sun Jan 13, 2013
12:45:39 Wed Mar 31, 2013
17:41:28 Sun Jan 13, 2013
12:45:39 Wed Mar 31, 2013
17:41:28 Sun Jan 13, 2013
-
17:41:28 Sun Jan 13, 2013
12:45:39 Wed Mar 31, 2013
and Standalone
to add the ADC-VX infrastructure settings.
vx
Image status
------------
Incompatible
Active
Active
Active
Active
Idle
Idle
-
Active
Idle
Document ID: RDWR-ALOS-V2900_AG1302
vADC IDs
--------
-
6
7
10-12
15-20
28
1-5
-
22
-