Alteon Application Switch Operating System Application Guide
Load Balancing Special Services
Figure 45: RTSP Load Balancing
To configure content-intelligent RTSP load balancing
1. Before you start configuring RTSP load balancing, configure Alteon for standard server load
balancing, as described in
—
Connect each Media server to Alteon.
—
Configure the IP addresses on all devices connected to Alteon.
—
Configure the IP interfaces on Alteon.
—
Enable SLB
(/cfg/slb/on)
—
Enable client processing at the client port
—
Enable server processing at the Server Ports 2 and 7 (for example:
server ena)
—
Enable Direct Access Mode (DAM)
—
Disable proxy IP addressing
296
Server Load Balancing Configuration Basics, page
(/cfg/slb/port 1/client ena)
171:
/cfg/slb/port 2/
Document ID: RDWR-ALOS-V2900_AG1302