Radware Alteon Application Manual page 663

Using the hash metric, all traffic between specific IP source/destination address pairs flows
through the same firewall. This ensures that sessions established by the firewalls are maintained
for their duration.
Note: Other load-balancing metrics such as leastconns, roundrobin, minmiss, response, and
bandwidth can be used when enabling the transparent load balancing option. For more
information, see Free-Metric FWLB, page 683
7. Enable SLB.
>> Real server group 1# /cfg/slb/on
8. Create a filter to allow local subnet traffic on the dirty side of the firewalls to reach the firewall
interfaces.
>> Layer 4# /cfg/slb/filt 10
>> Filter 10# sip any
>> Filter 10# dip 192.16.12.0
>> Filter 10# dmask 255.255.255.0
>> Filter 10# action allow
>> Filter 10#ena
9. Create the FWLB redirection filter.
This filter redirects inbound traffic, load-balancing it among the defined real servers in the
group. In this network, the real servers represent IP interfaces on the clean-side Alteon.
>> Filter 10# /cfg/slb/filt 15
>> Filter 15# sip any
>> Filter 15# dip any
>> Filter 15# proto any
>> Filter 15# action redir
>> Filter 15# group 1
>> Filter 15# ena
10. Enable FWLB.
>> Filter 15# /adv/redir/fwlb ena
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
.
(Select Filter 10)
(From any source IP address)
(Specify destination IP address)
(Specify destination mask)
(Allow frames with this DIP address)
(Enable the filter)
(Select Filter 15)
(From any source IP address)
(To any destination IP address)
(For any protocol)
(Perform redirection)
(To Real Server Group 1)
(Enable this filter)
Firewall Load Balancing
663