Radware Alteon Application Manual page 116

Application switch operating system
Hide thumbs Also See for Alteon:
Table of Contents

Advertisement

Alteon Application Switch Operating System Application Guide
Basic IP Routing
2. Add the ports to their respective VLANs. The VLANs are configured as follows:
>> #
/cfg/l2/vlan 1
>> VLAN 1#
add port 1
>> VLAN 1#
add port 2
>> VLAN 1#
ena
>> VLAN 1#
/cfg/l2/vlan 2
>> VLAN 2#
add port 3
>> VLAN 2#
add port 4
>> VLAN 2#
ena
>> VLAN 2#
/cfg/l2/vlan 3
>> VLAN 3#
add port 5
>> VLAN 3#
add port 6
>> VLAN 3#
ena
Each time you add a port to a VLAN, you may get the following prompt:
Port 4 is an untagged port and its current PVID is 1.
Confirm changing PVID from 1 to 2
Enter y to set the default Port VLAN ID (PVID) for the port.
3. Add each IP interface to the appropriate VLAN.
Now that the ports are separated into three VLANs, the IP interface for each subnet must be
placed in the appropriate VLAN. Based on the configuration in
follows:
>> VLAN 3#
/cfg/l3/if 1
>> IP Interface 1#
>> IP Interface 1#
>> IP Interface 2#
>> IP Interface 2#
>> IP Interface 3#
>> IP Interface 3#
>> IP Interface 4#
4. Apply and verify the configuration.
>> IP Interface 5#
>> IP Interface 5#
>> Layer 2#
/info/port
Examine the resulting information. If any settings are incorrect, make the appropriate changes.
5. Save your new configuration changes.
>> Information#
save
116
[y/n] ?
vlan 2
/cfg/l3/if 2
vlan 1
/cfg/l3/if 3
vlan 1
/cfg/l3/if 4
vlan 3
apply
/info/l2/vlan
(Select VLAN 1)
(Add port for 1st floor to VLAN 1)
(Add port for second floor to VLAN 1)
(Enable VLAN 1)
(Select VLAN 2)
(Add port for default router 1)
(Add port for default router 2)
(Enable VLAN 2)
(Add port for default router 3)
(Select VLAN 3)
(Select port for common server 1)
(Enable VLAN 3)
step
2, the settings are made as
(Select IP interface 1 for default
routers)
(Set to VLAN 2)
(Select IP interface 2 for first floor)
(Set to VLAN 1)
(Select IP interface 3 for second floor)
(Set to VLAN 1)
(Select IP interface 4 for servers)
(Set to VLAN 3)
(Make your changes active)
(View current VLAN information)
(View current port information)
Document ID: RDWR-ALOS-V2900_AG1302

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents