Radware Alteon Application Manual page 700

Alteon Application Switch Operating System Application Guide
Virtual Private Network Load Balancing
>> # /cfg/slb/filt 100
>> # ena
>> # sip any
>> # dip 192.168.10.0/dmask 255.255.255.0
>> # action allow
>> # /cfg/slb/filt 110
>> # ena
>> # sip any
>> # dip 224.0.0.0/dmask 255.0.0.0
>> # action allow
11. Create the redirection filter and enable FWLB.
This filter redirects inbound traffic, redirecting it among the defined real servers in the group.
>> # /cfg/slb/filt 2048
>> # ena>> # sip any
>> # dip any
>> # action redir
>> # /cfg/slb/filt 2048/adv/redir
>> # fwlb ena
12. Create a filter to allow the management firewall (policy server) to reach the VPN firewall.
>> # /cfg/slb/filt 120 ena
>> # sip 192.168.10.120
>> # smask 255.255.255.255
>> # dip 10.0.0.0
>> # dmask 255.255.255.0
13. Add filters to the ingress port.
>> # /cfg/slb/port 1
>> # filt ena
>> # add 100/add 110/add 2048
14. Apply and save the configuration, and reboot Alteon.
>> # apply
>> # save
>> # /boot/reset
To configure the dirty-side Alteon DB
1. Turn off BOOTP.
>> # /cfg/sys/bootp dis
2. Define and enable VLAN 2 for ports 25 and 26.
>> # /cfg/l2/vlan 2/ena/def 25 26
700
Document ID: RDWR-ALOS-V2900_AG1302