Radware Alteon Application Manual page 740

Alteon Application Switch Operating System Application Guide
Global Server Load Balancing
11. Configure a static entry for client network 20.0.0.0.
>> # /cfg/slb/gslb/network 3ena
sip 20.1.1.10 mask 255.0.0.0
addvirt 1 20
addreal 2 10
addreal 3 30
To configure Site C
1. Enable SLB, DAM, and GSLB globally.
>> # /cfg/slb/on
>> # /cfg/slb/adv
direct ena
>> # /cfg/slb/gslb/on
2. Set up DSSP version 4 for client proximity updates.
>> # /cfg/slb/gslb/version 4
3. Set up the local real server.
>> # /cfg/slb/real 1
ena
ipver v4
rip 174.168.10.100
4. Set up remote real servers for Site A and Site B.
>> # /cfg/slb/real 2/ena
ipver v4
rip 174.14.70.200
>> # /cfg/slb/real 2/adv
remote ena
>> # /cfg/slb/real 3/ena
ipver v4
rip 201.2.2.100
5. Configure SLB group 1 with content-based health check.
>> # /cfg/slb/group 1
ipver v4
health http
content "index.html"
add 1
add 2
add 3
740
(Most preferred site)
(Least preferred site)
(Enable SLB)
(Enable DAM)
(Enable GSLB)
(Set the DSSP version to 4)
(Assign local real server IP)
(Assign real server to Site A)
(Enable remote real server for Site
A)
(Assign real server to Site B)
(Configure SLB Group 1)
(Enable HTTP-based health check)
(Configure content-based health
check for Group 1)
(Add Real Server 1)
(Add remote Real Server 2—Site B)
(add remote Real Server 3—Site C)
Document ID: RDWR-ALOS-V2900_AG1302