Radware Alteon Application Manual page 725

Figure 121: GSLB Topology with a Standalone GSLB Site Example
To configure the basics at the Tokyo site
Following a similar procedure as described in
site—Tokyo—in standalone mode.
Remember that in standalone mode, Alteon does not require SLB configuration of local real servers.
1. Optionally, on the Tokyo Alteon, configure management access and management gateway
address.
>> # /cfg/sys/mmgmt/addr 43.100.80.20
>> Management Port# mask 255.255.255.0
>> Management Port# gw 43.100.80.1
>> Management Port# ena
2. Configure a VLAN for the Internet traffic.
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
Configuring Basic GSLB, page
(Management port IP address)
(Management port mask)
(Management port gateway
address)
(Enable the management port)
Global Server Load Balancing
713, configure a third
725