Radware Alteon Application Manual page 316

Alteon Application Switch Operating System Application Guide
Load Balancing Special Services
2. Configure the IDS servers as real servers.
In Figure 49 - Server Load Balancing and IDS Load Balancing Across Multiple Alteons, page
319, the IDS servers are set up with non-routable IP addresses. The real servers must be
numbered 1 to 63.
>> # /cfg/slb/real 6/rip 10.20.20.1/ena
>> # /cfg/slb/real 7/rip 10.20.20.2/ena
>> # /cfg/slb/real 8/rip 10.20.20.3/ena
3. Create two IDS groups and add the IDS servers. Define the two IDS Groups 51 and 52. The IDS
group numbers must be between 1 to 63.
>> # /cfg/slb/group 51
>>Real Server Group 51# add 6
>>Real Server Group 51# add 7
>>Real Server Group 51# /cfg/slb/group 52
>>Real Server Group 52# add 8
4. Define the group metric for the IDS server groups. IDS SLB supports the hash metric only.
>>Real Server Group 51# metric hash
>>Real Server Group 51# /cfg/slb/group 52
>>Real Server Group 52# metric hash
The hash metric is implemented in two ways. For more information, see
5. Define the health check for the group. Configure ICMP health check for the group.
>>Real Server Group 51# health icmp
>>Real Server Group 51# /cfg/slb/group 52
>>Real Server Group 52# health arp
6. Define the group for IDS SLB.
>>Real Server Group 51# idslb ena
>>Real Server Group 51# /cfg/slb/group 52
>>Real Server Group 52# idslb ena
7. Select the rport for the IDS group.
>> # /cfg/slb/group 51
>>Real Server Group 51# idsrprt http
>>Real Server Group 51# /cfg/slb/group 52
>>Real Server Group 52# idsrprt any
316
(Specify IP address for IDS Server 6)
(Specify IP address for IDS Server 7)
(Specify IP address for IDS Server 8)
(Define a group)
(Add IDS Server 6)
(Add IDS Server 7)
(Define another group)
(Add IDS Server 8)
(Set the metric to hash)
(Select the other IDS group)
(Set the metric to hash)
step 4
(Set the health check to ICMP)
(Select the other IDS group)
(Set the health check to ARP)
(Enable IDS for the IDS server group)
(Select the other IDS group)
(Enable IDS for the IDS server group)
(Select the IDS group)
(Select HTTP traffic for IDS group)
(Select the IDS group)
(Select non-HTTP traffic for IDS group)
Document ID: RDWR-ALOS-V2900_AG1302
on page 313.