Alteon Application Switch Operating System Application Guide
High Availability
>> Main # /cfg/l3/if 2/vlan 20
2. On the standby Alteon, configure two more interfaces and associate a different VLAN with each
interface.
Each interface has a unique IP address.
>> Main # /cfg/l3/if 1
>> Main # /cfg/l3/if 1/ena
>> Main # /cfg/l3/if 1/addr 10.10.10.252
>> Main # /cfg/l3/if 1/mask 255.255.255.0
>> Main # /cfg/l3/if 1/vlan 10
>> Main # /cfg/l3/if 2
>> Main # /cfg/l3/if 2/ena
>> Main # /cfg/l3/if 2/addr 10.10.20.252
>> Main # /cfg/l3/if 2/mask 255.255.255.0
>> Main # /cfg/l3/if 2/vlan 20
To configure Layer 3 virtual router settings for VLANs
1. On the active Alteon, configure a different virtual router for each VLAN.
>> Main # /cfg/l3/vrrp/on
>> Main # /cfg/l3/vrrp/vr 1
>> Main # /cfg/l3/vrrp/vr 1/ena
>> Main # /cfg/l3/vrrp/vr 1/vrid 25
>> Main # /cfg/l3/vrrp/vr 1/if 1
>> Main # /cfg/l3/vrrp/vr 1/prio 101
>> Main # /cfg/l3/vrrp/vr 1/addr 10.10.10.254
>> Main # /cfg/l3/vrrp/vr 2
524
(Set the VLAN number for the
interface)
(Name the device interface)
(Enable the interface)
(Set the IP address for the interface)
(Set the subnet mask for the interface)
(Set the VLAN number for the
interface)
(Name the device interface)
(Enable the interface)
(Set the IP address for the interface)
(Set the subnet mask for the interface)
(Set the VLAN number for the
interface)
(Enable VRRP)
(Specify the virtual router number for
VLAN 10 at interface 1)
(Enable the virtual router)
(Set the virtual router ID)
(Select a device IP interface)
(Set the priority bias for the virtual
router)
(Set the virtual router IP address)
(Specify the virtual router number for
VLAN 20 at interface 2)
Document ID: RDWR-ALOS-V2900_AG1302