Radware Alteon Application Manual page 260

Alteon Application Switch Operating System Application Guide
Server Load Balancing
4. It is required to modify URLs in the body of the response, so set the body to include.
>>URL Modification add-new Rule 10#body
Current rule body: exclude
Enter new rule body [include|exclude] [exclude]:include
>>URL Modification add-new Rule 10#
5. Set match criteria:
>>URL Modification add-new Rule 10#match
>>URL Match#path
Current path match configuration:
Enter path match-type [sufx|prefx|eq|incl|any] [any]:sufx
Enter path to match:cars
6. Set the required action. Path match was set, so an action also must be specified. In order not to
change the path, use replace with the same path string.
>>URL Modification add-new Rule 10#action
>>URL Match#path
Current path action configuration: none
Enter path action-type [insert|replace|remove|none] [none]: insert
Enter path to insert: new-
Insert the specified path before or after the matched section? [b|a]: b
7. Enable the rule and the rule list.
>>URL Modification add-new Rule 10#ena
>>URL Modification add-new Rule 10#..
>>URL Modification rule-list add-new#ena
8. Apply and save. You can use cur to see the complete rule list configuration:
>>HTTP Modification rule-list add-new# apply
>>HTTP Modification rule-list add-new# save
>> HTTP Modification rule-list add-new# cur
Current Httpmod Rule-List add-new:
enabled
Rules:
1: enabled
element url
260
match:
protocol http, port 0
path suffix cars
action:
protocol http, port 0
path insert new- before
direction response
body include
Document ID: RDWR-ALOS-V2900_AG1302