Radware Alteon Application Manual page 702

Alteon Application Switch Operating System Application Guide
Virtual Private Network Load Balancing
>> # /cfg/slb/group 1
>> # metric hash
>> # add 1/add 2/add 3/add 4
10. Configure the filters to allow local subnet traffic on the dirty side of the VPN device to reach the
VPN device interfaces.
>> # /cfg/slb/filt 100
>> # ena
>> # sip any
>> # dip 192.168.10.0/dmask 255.255.255.0
>> # /cfg/slb/filt 110
>> # ena
>> # sip any
>> # dip 224.0.0.0/dmask 255.0.0.0
11. Create the redirection filter and enable FWLB.
This filter will redirect inbound traffic, among the defined real servers in the group.
>> # /cfg/slb/filt 2048
>> # ena
>> # sip any
>> # dip any
>> # proto any
>> # action redir
>> # /cfg/slb/filt 2048/adv/redir
>> # fwlb ena
12. Add filters to the ingress port.
>> # /cfg/slb/port 1
>> # filt ena
>> # add 100/add 110/add 2048
13. Apply and save the configuration and reboot Alteon.
>> # apply
>> # save
>> # /boot/reset
To test the configurations and general topology
Alteons should be able to perform health checks to each other and all devices should see four real
servers.
702
Document ID: RDWR-ALOS-V2900_AG1302