Radware Alteon Application Manual page 782

Alteon Application Switch Operating System Application Guide
Bandwidth Management
For more information about SLB configuration, refer to
Note: Ensure BWM is enabled on Alteon (
2. Select bandwidth Policy 1.
Each policy must have a number from 1 to 512.
>> # /cfg/bwm/pol 1
3. Set the hard, soft, and reserved rate limits for the bandwidth policy in Mbps.
>> Policy 1# hard 10
>> Policy 1# soft 8
>> Policy 1# resv 5
4. Select a BWM contract and name the contract. Each contract must have a unique number from 1
to 1024.
>> Policy 1# /cfg/bwm/cont 1
>> BWM Contract 1# name a.com
5. Assign the bandwidth policy to this contract. Each BWM contract must be assigned a bandwidth
policy.
>> BWM Contract 1# pol 1
6. Enable this BWM contract.
>> BWM Contract 1# ena
7. Select Bandwidth Policy 2.
>> BWM Contract 1# /cfg/bwm/policy 2
8. Set the hard, soft, and reserved rate limits for this policy, in Mbps.
>> Policy 2# hard 18
>> Policy 2# soft 15
>> Policy 2# resv 10
9. Select the second BWM contract and name the contract.
>> Policy 2# /cfg/bwm/cont 2
>> BWM Contract 2# name b.com
10. Assign the bandwidth policy to this contract. Each BWM contract must be assigned a bandwidth
policy.
>> BWM Contract 2# pol 2
11. Enable this BWM contract.
782
Server Load Balancing, page
).
/cfg/bwm/on
(Set "never exceed" rate)
(Set desired bandwidth rate)
(Set committed information rate)
(Set "never exceed" rate)
(Set desired bandwidth rate)
(Set committed information rate)
Document ID: RDWR-ALOS-V2900_AG1302
165.