Radware Alteon Application Manual page 284

Alteon Application Switch Operating System Application Guide
Load Balancing Special Services
/cfg/slb/real 21/ena/rip 10.10.10.21/layer7/ldapwr e
/cfg/slb/real 22/ena/rip 10.10.10.22/layer7/ldapwr e
/cfg/slb/real 26/ena/rip 10.10.10.26/layer7/ldapwr e
3. Configure Group 1 for LDAP.
>> # /cfg/slb/group 1
>> Real server group 1 # metric roundrobin
>> Real server group 1 # add 20
>> Real server group 1 # add 21
>> Real server group 1 # add 22
>> Real server group 1 # add 26
4. Configure and enable a virtual server IP address 1 on Alteon.
>> # /cfg/slb/virt 1/vip 20.20.20.20
>> Virtual Server 1# ena
5. Set up the LDAP service for the virtual server, and add real server Group 1.
>> Virtual Server 1# service ldap
>> Virtual Server 1 LDAP Service# group 1
6. Enable LDAP load balancing.
>> # /cfg/slb/virt 1/service ldap/ldapslb ena
7. Optionally, enable session reset for long LDAP connections.
>> # /cfg/slb/virt 1/service ldap/reset enable
8. Apply and save your configuration.
>> Virtual Server 1 LDAP Service# apply
>> Virtual Server 1 LDAP Service# save
284
(Configure and enable LDAP Write
Server 21)
(Configure and enable LDAP Write
Server 21)
(Configure and enable LDAP Write
Server 21)
(Select real server Group 1)
(Specify the load-balancing metric for
Group 1)
(Add Real Server 20)
(Add Real Server 21)
(Add Real Server 22)
(Add Real Server 26)
(Specify the virtual server IP address)
(Enable the virtual server)
(Specify the LDAP service)
(Select the real server group)
Document ID: RDWR-ALOS-V2900_AG1302