Radware Alteon Application Manual page 644

Alteon Application Switch Operating System Application Guide
WAN Link Load Balancing
2. Enable server processing.
>> # /cfg/slb/port 1/server ena
3. Enable filtering on server port 1.
Filtering is enabled on port 1, because you want Alteon to look up the session table for the
transparent load balancing entry.
>> # /cfg/slb/port 1
>> SLB Port 1# filt ena
Step 5—Configure the Virtual Server IP Address and the Services for Each ISP
All client requests are addressed to a virtual server IP address defined on Alteon. Clients acquire the
virtual server IP address through normal DNS resolution. In this example, HTTP and FTP are
configured as the services running on this virtual server, and this service is associated with the real
server group.
Other TCP/IP services can be configured in a similar fashion. For a list of other well-known services
and ports, see Table 20 - Well-Known Application Ports, page
see Multiple Services per Real Server, page
Define a virtual server IP address for each ISP.
Step 5a—Configure the Virtual Server IP Address and the Services for ISP 1
Define a virtual server and add the services and real server group for ISP 1.
1. Configure a virtual server for ISP 1.
>> # /cfg/slb/virt 1
>> Virtual 1 Server 1# vip 50.1.1.100
>> Virtual 1 Server 1# ena
2. Add HTTP and FTP services for the virtual server.
>> # /cfg/slb/virt 1
>> Virtual 1 Server 1# service 80
>> Virtual 1 Server 1 HTTP Service# group 3
>> Virtual 1 Server 1 HTTP Service#..
>> Virtual 1 Server 1# service ftp
>> Virtual 1 Server 1 ftp Service# group 3
Step 5b—Configure the Virtual Server IP Address and the Services for ISP 2
Define a virtual server and add the services and real server group for ISP 2.
1. Configure a virtual server for ISP 2.
>> # /cfg/slb/virt 2
>> Virtual Server 2# vip 80.1.1.100
>> Virtual Server 2# ena
644
(Select port 1)
(Enable the filter)
175. To configure multiple services,
177.
(Select the virtual server)
(Set IP address from the ISP 1 subnet)
(Enable virtual server)
(Select the virtual server)
(Add the HTTP service)
(Add real server group)
(Go to the virtual server menu)
(Add the FTP service)
(Add real server group)
(Select the virtual server)
(Set IP address from the ISP 1 subnet)
(Enable virtual server)
Document ID: RDWR-ALOS-V2900_AG1302