Radware Alteon Application Manual page 619

Figure 100: IP Packet Format
To enter pattern criteria
>> /cfg/slb/layer7/slb/addstr
Table 53 includes an explanation of values you are prompted to provide:
Value Description
Pattern A pattern can be a regular expression string pattern in ASCII characters, or a binary
pattern in hexadecimal notation. For more information on using regular expressions
to match pattern data, see
If the pattern is binary, specify the binary pattern in hexadecimal notation. For
example, to specify the binary pattern
Offset An offset value is the byte count from the start of the IP header, from which a
search or compare operation is performed. An offset value is always required when
the creating pattern strings, even if the desired value is zero (0).
For example, if an offset of 12 is specified, Alteon starts examining the hexadecimal
representation of a binary string from the 13th byte. In the IP packet, the 13th byte
starts at the source IP address portion of the IP payload.
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
Table 53: Pattern Criteria Values
Regular Expression Matching, page
1111 1100 0010 1101
Advanced Denial of Service Protection
803.
, enter
FC2D
.
619