Radware Alteon Application Manual page 741

6. Enable client and server processing.
>> # /cfg/slb/port 1
server ena
>> # /cfg/slb/port 8
client ena
server ena
7. Configure virtual IP for the local site.
>> # /cfg/slb/virt 1
ena
ipver v4
vip 201.2.2.100
dname "radware.com"
8. Enable virtual service with dbind and client proximity.
>> # /cfg/slb/virt 1/service http
group 1
dbind ena
>> # /cfg/slb/virt 1/service http/http
clntprox http
9. Configure the interfaces of the remote site for DSSP updates.
>> # /cfg/slb/gslb/site 1
ena
prima 174.14.70.1
>> # /cfg/slb/gslb/site 2
ena
prima 210.10.10.1
10. Create a static entry for each remote site with local VIP as the closest site. This prevents client
proximity calculation for health check packets.
>> # /cfg/slb/gslb/network 1
ena
sip 174.14.70.1
mask 255.255.0.0
addvirt 1 1
>> # /cfg/slb/gslb/network 2
ena
sip 210.10.10.1
mask 255.255.0.0
addvirt 1 1
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Enable server processing)
(Enable client processing)
(Enable server processing for health
packet in this port)
(Configure virtual server)
(Local VIP—Site C)
(Assign domain name)
(Enable delayed binding for HTTP
service)
(Enable client proximity for HTTP/
HTTPS service)
(Enable Site B)
(Remote site interface IP)
(Enable Site A)
(Remote site interface IP)
Global Server Load Balancing
741