Radware Alteon Application Manual page 275

>> Main# /cfg/slb/accel/compress/comppol myPol
>> Compression Policy myPol#
>> Compression Policy myPol# ena
For details on defining additional compression policy parameters, see the section on the
/cfg/slb/accel/compress/comppol
System Command Reference.
3. Globally enable compression.
>> Main# /cfg/slb/accel/compress/on
4. Set the HTTP virtual service to used in the defined virtual server.
>> Main# /cfg/slb/virt 1/service 80/http
>> HTTP Load Balancing# comppol myPol
5. Enable DAM or configure proxy IP addresses and enable proxy on the client port.
Example 2: Configuring a Compression Service with a Compression URL
Exception Rule List
1. Before you can configure a compression service, ensure that Alteon is configured for basic SLB:
— Assign an IP address to each of the real servers in the server pool.
— Define an IP interface.
— Define each real server.
— Assign servers to real server groups.
— Enable SLB.
— Define server port and client port.
— Define virtual server
For more information on how to configure your network for SLB, see
page 165.
2. Define the compression policy which will govern the compression behavior:
>> Main# /cfg/slb/accel/compress/comppol myPol
>> Compression Policy myPol# urllist myurllist
>> Compression Policy myPol# ena
For details on defining additional compression policy parameters, see the section on the
/cfg/slb/accel/compress/comppol
System Command Reference.
3. Define a compression URL exception rule list.
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
(Define an ID to identify the
compression policy)
(Enable the policy)
menu in the Alteon Application Switch Operating
(Define HTTP service)
(Associate the defined
compression policy)
(Define an ID to identify the
compression policy)
(Associate a URL Rule List)
(Enable the policy)
menu in the Alteon Application Switch Operating
Server Load Balancing
Server Load Balancing,
275