Resource Dashboard - Radware Alteon Application Manual

To share resource consumption of vADCs
Access the System menu and disable the limitcu command.
>> /cfg/sys/limitcu/disable
Limiting Resource Consumption of vADCs
Limit (enabled) mode is a resource management mode for handling idle resources. Unlike share
mode, in which idle resources can be used by any active vADC, in limit mode idle resources remain
unused and vADCs can use only resources assigned specifically to them.
In this mode, resource consumption is static and is allocated to a full system of 24 vADCs.
To limit resource consumption of vADCs
Access the System menu and enable the limitcu command.
>> /cfg/sys/limitcu/enable

Resource Dashboard

Each vADC has an accompanying dashboard that monitors the processing power and throughput
usage relative to the total allocated resources. The dashboard provides a centralized view of this
data so the Global Administrator can preemptively identify potential application and user issues and
needs by verifying the health, resource usage, and activity of the vADC.
Note: The dashboard is only accessible through the BBI.
The dashboard displays data on throughput and CPU usage, enabling the Global Administrator to
identify allocation issues and dependencies between the throughput and CPU usage. The charts on
the dashboard provide the Global Administrator with answers to the following questions:
• Are there any vADCs (applications and/or services) that do not have enough resources to fulfill
their tasks successfully or optimally?
• If there are not enough resources, is there a problem with the system or application that needs
to be addressed, or is it just displaying uncharacteristic behavior?
This section includes the following topics:
• Accessing the Dashboard, page 412
• Dashboard Charts, page 413
• Settings Menu, page 417
Document ID: RDWR-ALOS-V2900_AG1302
Alteon Application Switch Operating System Application Guide
ADC-VX Management
411