Radware Alteon Application Manual page 720

Alteon Application Switch Operating System Application Guide
Global Server Load Balancing
>> # /cfg/l2/vlan 102/name internet
>> VLAN 102# add 2/ena
Port 2 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 102 [y/n]: y
Current ports for VLAN 102:
Pending new ports for VLAN 102:
Current status: disabled
New status: enabled
4. Configure a VLAN for local server traffic, and add server ports to this VLAN.
>> # /cfg/l2/vlan 202/name servers
>> VLAN 202# add 11/ena
Port 10 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 202 [y/n]: y
Current ports for VLAN 202:
Pending new ports for VLAN 202:
Current status: disabled
New status: enabled
>> VLAN 202# add 12/ena
Port 11 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 202 [y/n]: y
Current ports for VLAN 202:
Pending new ports for VLAN 202:
5. Define an IP interface to the local real servers.
>> # /cfg/l3/if 202
>> IP Interface 202# addr 174.40.7.202
>> IP Interface 202# mask 255.255.255.0
>> IP Interface 202# vlan 202
>> IP Interface 202# ena
6. Define an IP interface to the Internet.
>> # /cfg/l3/if 102
>> IP Interface 102# addr 174.14.70.2
>> IP Interface 102# mask 255.255.255.0
>> IP Interface 102# vlan 102
>> IP Interface 102# ena
7. Define the default gateway.
>> IP Interface 102# /cfg/l3/gw 1
>> Default gateway 1# addr 174.14.70.101
>> Default gateway 1# ena
720
(VLAN 102 for Internet)
(Add port 2 to VLAN 102 and enable)
empty
2
(VLAN 202 for local servers)
(Add Port 11 to VLAN 202)
empty
11
(Add Port 12 to VLAN 201)
empty
11 12
(Select IP Interface 202)
(Assign IP address for the interface)
(Assign network mask)
(Assign interface to VLAN 202)
(Enable IP Interface 202)
(Select IP Interface 102)
(Assign IP address for the
interface)
(Assign network mask)
(Assign interface to VLAN 102)
(Enable IP Interface 102)
(Select Default Gateway 1)
(Assign IP address for the
gateway)
(Enable Default Gateway 1)
Document ID: RDWR-ALOS-V2900_AG1302