Radware Alteon Application Manual page 830

Alteon Application Switch Operating System Application Guide
Content-Intelligent Server Load Balancing Not Using Layer 7 Content Switching Rules
2. Configure Filter 8 redirect URL as described above. By default, filter protocol is any. Change it to
udp.
>> /cfg/slb/filt 8
>> Filter 8 # sip 10.46.6.231
Current source address:
New pending source address: 10.46.6.231
>> Filter 8 # smask 255.255.255.255
Current source mask:
New pending source mask: 255.255.255.255
>> Filter 8 # proto tcp
Enter protocol or any: udp
Pending new protocol:
>> Filter 8 # dport http
Current destination port or range:
Pending new destination port or range:
>> Filter 8 # action redir
Current action: allow
Pending new action:
>> Filter 8 # /cfg/slb/filt/adv/layer7
>> Layer 7 Advanced# addrd
Enter filtering string ID (1-1024) to redirect from: 2
Enter filtering string ID (2-1024) to redirect to:
3. Apply and save the configuration.
>> Layer 7 Advanced# apply
>> Layer 7 Advanced# save
Example HTTP to HTTPS Redirection
To redirect HTTP requires to HTTPS connections, the following filters can be set:
— Filter 9—Configure a filter that intercepts HTTP traffic to http://www.abc.com and
redirects it to https://www.abc.com
— Filter 10—Configure a filter that intercepts HTTP traffic directed to 205.10.10.10 and
redirects it to HTTPS.
1. Define Layer 7 strings and identify their ID numbers. The strings in bold in the filters defined
above are used in this example
/c/slb/layer7/slb/cur
ren 2 "HTTPHDR=Host:any"
ren 3 "HTTPHDR=Host:www.abc.com,"
ren 4 "HTTPHDR=Host:any:443"
830
any
0.0.0.0
tcp
any
http
redir
14
Document ID: RDWR-ALOS-V2900_AG1302