E Dri E Operations By Memobus/Modbus - YASKAWA CIMR-ZU A Series Programming Manual

E Dri e Operations by MEMOBUS/Modbus
E Dri e Operations by MEMOBUS/Modbus
The drive operations that can be performed by MEMOBUS/Modbus communication depend on drive parameter settings. This
section explains the functions that can be used and related parameter settings.
Obser in t e Dri e Operation
PLCs can perform the following actions with MEMOBUS/Modbus communications:
• observe drive status and drive control terminal status
• read and write parameters (not H5- )
• reset faults
• set multi-function inputs
Input settings from the input terminals (S1 to S8) and from MEMOBUS/Modbus communications are both linked by a logical OR operation.
Note:
8