YASKAWA CIMR-ZU A Series Programming Manual page 196

2 Dri e Coolin Fans
A Fan unit
B Cable lands
2
Pull out the two relay connectors.
A
Remove the screws holding the cooling fan unit in place and slide the fan unit out of the drive.
CAU ION Injury to Personnel. Use two hands to remove the fan unit. Failure to comply may cause the fan unit to fall, resulting in
minor to moderate injury.
Note Use a magnetized screwdriver when removing the screws to prevent the screws from falling.
Unscrew and remove the sealing nut. Yaskawa recommends using a wrench from AVC Corp. of Japan or equivalent.
1
B
C
D
Fi ure 2 8 Coolin Fan eplacement
A
elay connectors
Fi ure 2 emo e t e elay Connectors
Fi ure 2 emo e t e Coolin Fan Unit
A
C Fan cables
D elay connectors
A
A
B
C
D
2
A 2
2