YASKAWA CIMR-ZU A Series Programming Manual page 194

2 Dri e Coolin Fans
A Sealin nut
B Sealin insert
Fi ure 2
The remaining space between the sealing nut and the clamping claw should be between 2.5 and 3.0 mm (0.10 to 0.12
in).
A Sealin nut
B Cable land body
Insert the cooling fan unit into the drive.
Note Use a magnetized screwdriver when inserting the screws to prevent the screws from falling.
Fi ure 2
7
Reverse procedure steps 2 and 3 in
4A0156 to 4A0240
the User Manual packaged with the drive for details on reattaching the terminal cover.
1
A
B
C
D
eassemble t e Cable Gland 2A 1
2.5 to 3.0 mm
(0.10 to 0.12 in)
Fi ure 2 Cable Gland 2A 1
Insert t e Coolin Fan Unit 2A 1
Removing and Disassembling the Cooling Fan Unit: 2A0143 to 2A0273,
to reattach the drive cover. After reattaching the drive cover, reattach the terminal cover. Refer to
C Clampin cla
D Cable land body
to 2A 27 A 1
A
B
C
C Fan unit
to 2A 27 A 1 to A 2
to 2A 27 A 1
to A 2
to A 2