YASKAWA CIMR-ZU A Series Programming Manual page 143

S Secondary PI Display Di its
Sets the decimal place display for secondary PI units.
No
S3-03
Settin No Decimal Places
Settin 1 One Decimal Place
Settin 2 o Decimal Places
Settin ree Decimal Places
S Secondary PI Unit Selection
Sets units for secondary PI control function.
No
S3-04
Settin Inc o ater ( C)
Settin 1 Pounds per S uare Inc (PSI)
Settin 2 Gallons per Minute (GPM)
Settin De rees Fa ren eit (F)
Settin Cubic Feet per Minute (CFM)
Settin Cubic Meters per our (CM )
Settin Liters per our (LP )
Settin 7 Liters per Second (LPS)
Settin 8 Bar (Bar)
Settin Pascals (Pa)
Settin 1 De rees Celsius (C)
Settin 11 Meters (Mtr) (Ft Feet)
Settin 12 Liters per Minute (LPM)
Settin 1 Cubic Meters per Minute (CMM)
Settin 1 No Unit
Settin 1 Percenta e ( )
S Secondary PI Setpoint alue
Sets the secondary PI controller target value
No
S3-05
<1> Upper limit is S3-02, decimal place holder is determined by S3-03.
<2> Unit is determined by S3-04.
S Secondary PI Proportional Gain Settin
Sets the proportional gain of the secondary PI controller. A setting of 0.00 disables P control.
No
S3-06
S 7 Secondary PI Inte ral ime Settin
Sets the integral time for the secondary PI controller. A setting of 0.0s disables integral control.
No
S3-07
Name
Secondary PI Display Digits
Name
Secondary PI Unit Selection
Name
Secondary PI Setpoint Value
Name
Secondary PI Proportional Gain Setting
Name
Secondary PI Integral Time Setting
1 11 S Special Parameters
Settin an e
0 to 3
Settin an e
0 to 15
Settin an e
0.00 to 600.00
<1>
Settin an e
0.00 to 25.00
Settin an e
0.0 to 360.0 s
De ault
2
De ault
15
De ault
0.00
<2>
1
De ault
1.00
De ault
1.0 s
1